Risultati di ricerca

Resinated Transformers UI 48/17 40 VA / Products / Resinated Transformers / Resinated Transformers UI / UI4817 Transformers mod. UI with a 2 X 115 V double primary circuit for 230 V series connection or 115 V + 115 V parallel connection. Possibility of fixing through pins or through 4 DIN 7971 2.4 mm holes. built according to the European standard EN61558-2-6 which guarantees a product of quality and reliability ensured not only by the use of excellent materials but also by the constant construction methodology and by our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. Dimensions Documents Menu UI 30/7,5 UI 30/10 UI 30/16 UI 39/10 UI 39/13 UI 39/17 UI 39/21 UI 48/17 UI 48/26 ​ ​ Examples

Trasformatori Resinati EI 30 EI40 EI 42 EI54 EI60 EI66 EI75 EI84 / Products / Resinated Transformers / Resin Transformers EI / EI48 EI 48 resin transformers from 6 to 15 VA Trasformatori 18.5VA EI48/25, inglobati in resina autoestinguente, piedinature su richiesta Informazioni costruttive

PRIVACY POLICY PRIVACY DISCLAIMER VM ENGINEERING SAS di Luigi Mariani & C. with registered office in Appiano Gentile CO in Via Monsignor Crespi 11 is constantly committed to protecting the online privacy of its users. This document will allow you to know our privacy policy to understand how your personal information is managed when you use our services and to allow you, if necessary, to give consent to the processing of your personal data expressed and aware in the sections of the site where it is required to provide personal data. We remind you that in the various sections of the website www.tagliorettisrl.eu (hereinafter "Site") where we collect your personal data, specific information is published pursuant to art. 13 of EU Regulation 2016/679 (hereinafter: "Regulation") for its necessary acknowledgment before providing the requested data. The information and data you provide or otherwise acquired as part of the registration to the various services of the site will be processed in compliance with the provisions of the Regulations and the confidentiality obligations that inspire the activity of VM ENGINEERING SAS According to the rules of the Regulation, the treatments carried out by VM ENGINEERING SAS will be based on the principles of lawfulness, correctness, transparency, purpose limitation and conservation, data minimization, accuracy, integrity and confidentiality. INDEX 1. Owner of the data processing 2. The personal data being processed to. Navigation data b. Data processed in the context of interaction with social media c. Cookies 3. Purpose of the treatment 4. Legal basis and mandatory or optional nature of the processing 5. Recipients of personal data 6. Transfers of personal data 7. Retention of personal data 8. Rights of the interested party 9. Changes 1 - HOLDER OF DATA PROCESSING The Data Controller carried out through the Site is VM ENGINEERING SAS as defined above. The structure of VM ENGINEERING SAS is equipped with a data protection officer. The manager is available for any information concerning the processing of the Customer's personal data. You can contact the manager by writing to: info@trasformatorivm.it 2 - THE PERSONAL DATA OBJECT OF THE TREATMENT By processing of personal data, we mean any operation or set of operations, carried out with or without the aid of automated processes and applied to personal data or sets of personal data, such as the collection, registration, organization, structuring, storage, adaptation or modification, extraction, consultation, use, communication by transmission, dissemination or any other form of making available, comparison or interconnection, limitation, cancellation or destruction . We inform you that the personal data being processed will consist (also depending on your decisions on how to use the Services) from an identifier such as name, email address, identification number, location data, an online identifier , purchases made, and other data suitable for making you identified or identifiable, depending on the type of Services requested (hereinafter only "Personal Data"). in particular, the Personal Data processed through the Site are as follows: to. Navigation data The computer systems and software procedures used to operate the Site acquire, during their normal operation, some Personal Data whose transmission is implicit in the use of Internet communication protocols. This is information that is not collected to be associated with identified interested parties, but which by their very nature could, through processing and association with data held by third parties, allow users to be identified. This category of data includes IP addresses or domain names of the computers used by users who connect to the Site, the addresses in the Uniform Resource Identifier (URI) notation of the requested resources, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server (successful, error, etc.) and other parameters relating to the operating system and the user's computer environment. These data are used for the sole purpose of obtaining anonymous statistical information on the use of the Site and the sites of our customers and to check its correct functioning, to identify anomalies and / or abuses, and are deleted immediately after processing. The data could be used to ascertain responsibility in the event of hypothetical computer crimes against the site or third parties: except for this possibility, the data on web contacts do not persist for more than fourteen days, unless requested by the 'user (e.g. access to the user's personal pages within the VM ENGINEERING SAS which summarize the services used, the information published, etc.). b. Data processed in the context of interaction with social networks In addition to filling out the appropriate registration form, the user can register for the Services, if he has a profile of a Social Network (Facebook, Instagram, LinkedIn, etc.), even by simply clicking on the "Login with Social Network" button. In this case, the Social Network will automatically send some of its Personal Data to VM ENGINEERING SAS, specified in the appropriate "pop-up" window that appears at the time of the request, and there will be no need to fill in other forms on its part. If, on the other hand, the user is already a registered user of VM ENGINEERING SAS, and also has a profile of a Social Network, he can choose to associate his site account with his Social Network account, by clicking on "Login with the Social Network" and then on "Associate account": in this way, your Site identification code will be associated with your Social Network user code, and then you can, with a simple click on "Login with Social Network", log in directly to your reserved area without enter your credentials. c. Cookies - Definition, characteristics and application of the legislation Cookies are small text files that the sites visited by the user send and record on their computer or mobile device, to be then re-transmitted to the same sites on the next visit. Thanks to cookies, a site remembers the user's actions and preferences (such as, for example, login data, the chosen language, font size, other display settings, etc.) so that they do not have to be indicated again. when the user returns to visit said site or browse from one page to another of it. Cookies, therefore, are used to perform computer authentication, session monitoring and storage of information regarding the activities of users who access a site and may also contain a unique identification code that allows you to keep track of the user's navigation within. of the site itself for statistical or advertising purposes. While browsing a site, the user can also receive cookies from sites or web servers other than the one he is visiting on his computer or mobile device (so-called "third party" cookies). Some operations could not be performed without the use of cookies, which in some cases are therefore technically necessary for the site to function. There are various types of cookies, depending on their characteristics and functions, and these can remain on the user's computer or mobile device for different periods of time: session cookies, which are automatically deleted when the browser is closed; persistent cookies, which remain on the user's device until a pre-established expiry date. According to the legislation in force in Italy, the user's express consent is not always required for the use of cookies. In particular, "technical cookies", ie those used for the sole purpose of transmitting a communication over an electronic communications network, or to the extent strictly necessary to provide a service explicitly requested by the user, do not require this consent. In other words, these are cookies that are essential for the operation of the site or necessary to perform activities requested by the user. Among the technical cookies, which do not require express consent for their use, the Italian Data Protection Authority (see Measure Identification of simplified procedures for information and the acquisition of consent for the use of cookies 'May 8, 2014, hereinafter only "Provision") also includes: The "analytics cookies" when used directly by the site operator to collect information, in aggregate form, on the number of users and how they visit the site. Navigation or session cookies (to authenticate). Functionality cookies, which allow the user to browse according to a series of selected criteria (for example, the language, the products selected for purchase) in order to improve the service provided. For "profiling cookies", vice versa, ie those aimed at creating profiles relating to the user and used in order to send advertising messages in line with the preferences expressed by the same in the context of surfing the net, a prior consent of the 'user. Types of cookies used by the Site and the possibility of (de-) selection (Cookies - or links to information from third parties that send cookies - followed by an asterisk refer to the site www.tagliorettisrl.eu). The Site uses the following cookies that can be de-selected, except for third-party cookies for which you must refer directly to the relative selection and de-selection methods of the respective cookies, indicated by means of links: Technical / navigation or session cookies and strictly necessary for the operation of the Site or to allow the user to use the contents and services requested by them. Analytics cookies, which allow you to understand how the Site is used by users. These cookies do not collect information on the user's identity, nor any personal data. The information is treated in an aggregate and anonymous form. Functionality cookies, i.e. used to activate specific functions of the Site and a series of selected criteria (for example, the language, the products selected for purchase) in order to improve the service rendered. Profiling cookies used in order to send advertising messages in line with the preferences expressed by the user while surfing the net. ATTENTION: By disabling technical and / or functional cookies, the Site may not be available for consultation or some services or certain functions of the Site may not be available or may not work properly and you may be forced to modify or manually enter some information or preferences each time will visit the Site. Third-party cookies, i.e. cookies from websites or web servers other than that of VM ENGINEERING SAS used for the purposes of said third parties, including profiling cookies. It should be noted that these third parties are independent data controllers collected through the cookies they serve; therefore, you must refer to their personal data processing policies, information and consent forms (selection and de-selection of the respective cookies), as specified in the aforementioned Provision. For the sake of completeness, it is also specified that VM ENGINEERING SAS does its utmost to be able to track cookies on its Site. Below it is possible for you to make a choice with reference to the receipt of profiling cookies. Failure to authorize the cookies indicated (profiling) will not affect the functioning of the Site. You can block or delete (in whole or in part) the technical and functional cookies through the specific functions of your browser. However, we inform you that not authorizing technical cookies could make it impossible to use the Site, view its contents and use the related services. Inhibiting functionality cookies could mean that some services or certain functions of the Site are not available or do not work properly and you may be forced to modify or manually enter some information or preferences each time you visit the Site. The choices made in relation to the Site's cookies will in turn be recorded in a specific cookie. This cookie may, however, in some circumstances not work properly: in such cases, we recommend that you delete unwanted cookies and inhibit their use also through the functionality of your browser. Your cookie preferences will be reset if you use different devices or browsers to access the Site. Profiling cookies They are sent in order to send advertising messages in line with the preferences expressed by the user while surfing the net. How to view and modify cookies through your own program (cd browser) You can select which proprietary cookies to authorize through the appropriate procedure set up on this page, as well as authorize, block or delete (in whole or in part) cookies through the specific functions of your navigation program (so-called browser). For more information on how to set preferences on the use of cookies through your browser, you can consult the relevant instructions: Internet Explorer Firefox Chrome Opera Safari 3 - PURPOSE OF THE TREATMENT The treatment we intend to carry out, with your specific consent where necessary, has the following purposes: Allow the provision of the Services requested by the user and contact him in the requested manner; Allow navigation and consultation of the VM ENGINEERING SAS websites; Respond to requests for assistance or information, which we will receive via e-mail, telephone or chat through the "Contacts" page of our Site. To fulfill legal, accounting and tax obligations; Carry out direct marketing via e-mail for services similar to those subscribed by the user, unless he has opposed this treatment initially or on the occasion of subsequent communications, for the pursuit of the legitimate interest of VM ENGINEERING SAS to promote products or services in which the user can reasonably be interested; Elaborate studies, research, market statistics; send advertising material, information, commercial information or surveys to improve the service ("customer satisfaction") via e-mail or text message, and / or through the use of the telephone with operator and / or through the official pages of VM ENGINEERING SAS on Social Networks; Make personalized commercial proposals based on the products or services purchased by the user, or which he is interested in browsing our Site, or on the basis of the group of customers to which he belongs (profiling). This means, for example, that if you are a reseller you will receive commercial offers intended for resellers; if the user has browsed our Site to search for information on certain services, he will receive offers relating to those services; finally, if the user is using a service, based on his use of the service, he will receive targeted communications from VM ENGINEERING SAS. This type of analysis is typically carried out on purchase data relating to both individuals and legal entities and the related decisions are not based on solely automated processing. This processing is necessary for the pursuit of the legitimate interest of the data controller to personalize their commercial proposals. The user can always oppose this treatment by e-mail to the address: info@trasformatorivm.it For the exclusive purposes of security and prevention of fraudulent conduct, the Data Controller puts in place an automatic control system which involves the detection and analysis of user behavior on the site associated with the processing of Personal Data including the IP address. The consequences of this treatment are that if a subject attempts to engage in fraudulent conduct on the VM ENGINEERING SAS website, for example to benefit from the same promotion several times without being entitled to it, VM ENGINEERING SAS reserves the right to exclude this subject from the promotion. or to adopt any other appropriate measure for its own protection. 4 - LEGAL BASIS AND OBLIGATORY OR OPTIONAL NATURE OF THE PROCESSING The legal basis for the processing of Personal Data for the purposes referred to in section 3 (abc) is art. 6 (1) (b) of the Regulation as the processing is necessary for the provision of the contracted services. The provision of Personal Data for these purposes is optional but failure to provide it would make it impossible to activate the requested Services. The purpose referred to in section 3 (d) represents a legitimate processing of Personal Data pursuant to art. 6 (1) (c) of the Regulation. Once the Personal Data has been provided, the processing may indeed be necessary to fulfill legal obligations to which VM ENGINEERING SAS is subject. The treatments carried out for marketing purposes described in section 3 (f) and for communication to third parties described in section 3 (g) are based on the release of your consent pursuant to art. 6 (1) (a) of the Regulation. The provision of your Personal Data for these purposes is entirely optional and does not affect the use of the Services. The treatments referred to in section 3 (e), carried out for the purposes of e-mail marketing on products or services similar to those purchased by you, find instead its legal basis, pursuant to art. 6.1.f of the Regulations, in the legitimate interest of VM ENGINEERING SAS to promote its products or services in a context in which the interested party can reasonably expect this type of treatment, to which he can also oppose at any time. In fact, if you wish to oppose the processing of your data for marketing purposes, referred to in sections 3 (e) and 3 (f), you can do so by sending a request to this email: info@trasformatorivm.it or through the proposed mechanism. in the commercial email footer. The profiling processing referred to in section 3 (h), which you can object to at any time, is based on the legitimate interest of the Data Controller, pursuant to article 6.1.f. of the Regulations, to personalize their commercial communications. The treatment referred to in section 3 (i) is also based on the legitimate interest of the Data Controller to detect frauds and scams carried out to his detriment, in accordance with art. 6.1.f of the Regulations. 5 - RECIPIENTS OF PERSONAL DATA The user's Personal Data may be shared, for the purposes referred to in section 3 above, with: to. subjects who typically act as data processors, namely: 1) people, companies or professional firms that provide assistance and advice to the Customer in accounting, administrative, legal, tax, financial and credit recovery matters relating to the provision of the Services; 2) subjects with whom it is necessary to interact for the provision of the Services (for example the national and foreign registration Authorities to which the technical and administrative documentation and the Maintainer forms must be transmitted, the authorities that manage the WHOIS database that contains personal data of the assignees of domain names, the subjects that provide the payment service by credit card, (Mercury Payments and Banca Sella) etc. 3) or subjects delegated to carry out technical maintenance activities (including maintenance of network equipment and electronic communication networks); 4), Italian or foreign, for administrative or statistical purposes (collectively "Recipients"); b. subjects, bodies or authorities to whom it is mandatory to communicate your personal data by virtue of legal provisions or orders of the authorities (for example, in the course of criminal investigations, VM ENGINEERING SAS may receive requests from the judicial authority to provide electronic traffic logs); c. persons authorized by VM ENGINEERING SAS to process Personal Data necessary to carry out activities strictly related to the provision of the Services, who are committed to confidentiality or have an adequate legal obligation of confidentiality, such as employees of VM ENGINEERING SAS; d. commercial partners for their own purposes, autonomous and distinct, only if you have given specific consent. The complete list of data processors is available by sending a written request to the following email: info@trasformatorivm.it 6 - TRANSFER OF PERSONAL DATA Some of your Personal Data are shared with Recipients who may be located outside the European Economic Area. VM ENGINEERING SAS ensures that the processing of Personal Data by these Recipients takes place in compliance with the Regulations. Indeed, transfers can be based on an adequacy decision or on the Standard Contractual Clauses approved by the European Commission. More information is available from the Data Controller. As part of the domain name registration services, the data are communicated to the subjects listed in section 2 (e) of this policy: in some cases these treatments involve the transfer of the data in question outside the European Economic Area. Given that this transfer is necessary for your use of the service, according to the privacy legislation in force, it is justified pursuant to art. 49 (1) (b) of the Regulation. 7 - DATA STORAGE The Personal Data processed for the purposes referred to in section 3 (abc) will be kept for the time strictly necessary to achieve those same purposes. In any case, since these are treatments carried out for the provision of Services, VM ENGINEERING SAS will process the Personal Data up to the time allowed by Italian law to protect its interests (Article 2946 of the civil code and following). The Personal Data processed for the purposes referred to in section 3 (d) will be kept until the time required by the specific obligation or applicable law. By way of example, as already specified, traffic data will be kept for legal purposes for six years from their generation; otherwise, they will be kept for six months. For the purposes referred to in section 3 (e) (f), your Personal Data will instead be processed until the revocation of your consent or up to three years after you have ceased to be a customer of VM ENGINEERING SAS, or simply registered on the Site, or sent a request for information. In any case, the possibility for the Customer to keep his Personal Data up to the time allowed by Italian law to protect his interests (Art. 2947 (1) (3) cc) is reserved. More information about the data retention period and the criteria used to determine this period can be requested by writing to the Data Controller or the DPO at the following email: info@trasformatorivm.it 8 - RIGHTS OF THE INTERESTED PARTIES The user has the right to ask VM ENGINEERING SAS, at any time, to access his Personal Data, to rectify or cancel them or to oppose their processing in the cases provided for in Article 20 of the Regulations, he has the right to request the limitation of processing in the cases provided for by art. 18 of the Regulation, as well as to obtain in a structured format, commonly used and readable by automatic device, the data concerning him (portability), in the cases provided for by art. 20 of the Regulation. Requests must be sent in writing to: info@trasformatorivm.it To exercise the right to portability and obtain more information on the content, send an email to: info@trasformatorivm.it In any case, the user is always entitled to lodge a complaint with the competent supervisory authority (Guarantor for the Protection of Personal Data), pursuant to art. 77 of the Regulation, if you believe that the processing of your data is contrary to the legislation in force.

EI 96 transformers FROM 160 TO 250 VA / Products / Control Transformers / EI96 The items of the EI96 series are control transformers, not resistant to short circuits, built according to the European standard EN61558-2-2 which guarantees a product of quality and reliability ensured not only by the use of excellent materials but also by the constant method of construction and by our testing systems applied to the entire production. To protect the transformers from overloads or short circuits, it is envisaged that protection devices (fuses) not supplied with the transformer, of the value indicated on the plate, must be used. The peculiar characteristics of the EI96 series: Primary voltage (optionally from 115V up to 400V) secondary voltage (choice between 4V and 48V) Possibility of distributing the total power up to 3 secondary (low terminal holder), 4 secondary (high terminal holder) · Flexibility on the quantities that can be ordered Dimensions Menu EI 75 30/63 EI 75M 30/63 EI 75M2 30/63 EI 84 63/120 EI 84M 63/120 EI 84M2 63/120 EI 96 ​ ​ ​ Documents ei96.pdf Examples

EI 33 resin transformers from 1 to 2 VA (2 PRIMARY) / Products / Resinated Transformers / Resin Transformers EI / EI33 The items of the EI33 series are safety transformers, fail-safe, for 50 / 60Hz frequencies, built according to the European standard EN61558-2-6 which guarantees a product of quality and reliability ensured not only by the use of excellent materials constant construction methodology and by our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. The peculiar characteristics of the EI33 series: Wide range: pinout (your choice) - 2 primary voltages - secondary voltage (optionally from 4V to 48V) · Possibility of distributing the total power up to 2 secondaries · Flexibility on the quantities that can be ordered Dimensions Examples Menu EI 30 EI 33 EI 38 10 PINS EI 38 12 PINS EI 40 EI 42 E I 48 EI 60 EI 66 EI 75 EI 84 ​ Documents ei33.pdf

EI 60 resin transformers from 15 to 40 VA / Products / Resinated Transformers / Resinated Transformers EI / EI60 The items of the EI60 series are safety transformers, resistant to short circuits for construction or failure proof, for frequencies 50 / 60Hz, built according to the European standard EN61558-2-6 which guarantees a product of guaranteed quality and reliability as well as by use of excellent materials also from the constant construction methodology and from our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. The peculiar characteristics of the EI60 series: Wide range: pinout (your choice) primary voltage (optionally from 24V up to 440V) secondary voltage (optionally from 4V to 48V) · Possibility of distributing the total power up to 3 secondaries · Flexibility on the quantities that can be ordered Dimensions EI 30 EI 33 EI 38 10 PINS EI 38 12 PINS EI 40 EI 42 E I 48 EI 60 EI 66 EI 75 EI 84 ​ Menu Examples Documents ei60.pdf

News 02-01-2021 - New website published 04-01-2021 - Acquisition of the new domain www.vmtrafo.com 05-01-2021 - New direct chat platform added for technical and commercial info

Trasformatori Resinati EI 30 EI 30/5 0.65 VA EI40 EI 42 EI48 EI 48/16 10VA EI 48/20 15VA EI 48/25 18.5VA EI54 EI60 EI66 EI75 EI84 / Products / Resinated Transformers / Resin Transformers EI / EI48 EI 48 resin transformers from 6 to 15 VA Trasformatori 15VA EI48/20, inglobati in resina autoestinguente, piedinature su richiesta Informazioni costruttive

/ Products / Resinated Transformers / Resinated Transformers UI / UI307,5 Resinated Transformers UI 30 / 7,5 4 VA Transformers mod. UI with a 2 X 115 V double primary circuit for 230 V series connection or 115 V + 115 V parallel connection. Possibility of fixing through pins or through 4 DIN 7971 2.4 mm holes. built according to the European standard EN61558-2-6 which guarantees a product of quality and reliability ensured not only by the use of excellent materials but also by the constant construction methodology and by our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. Dimensions Documents Menu UI 30/7,5 UI 30/10 UI 30/16 UI 39/10 UI 39/13 UI 39/17 UI 39/21 UI 48/17 UI 48/26 ​ ​ Examples

Contacts VM Engineering sas by Luigi Mariani & C. Via Monsignor Crespi 11 22070 Appiano Gentile (CO) Tel. +39 031 933161 info: info@trasformatorivm.it Your form has been sent! Send Write to us

Resinated Transformers UI 30/10 6 VA / Products / Resinated Transformers / Resinated Transformers UI / UI3010 Transformers mod. UI with a 2 X 115 V double primary circuit for 230 V series connection or 115 V + 115 V parallel connection. Possibility of fixing through pins or through 4 DIN 7971 2.4 mm holes. built according to the European standard EN61558-2-6 which guarantees a product of quality and reliability ensured not only by the use of excellent materials but also by the constant construction methodology and by our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. Dimensions Documents Menu UI 30/7,5 UI 30/10 UI 30/16 UI 39/10 UI 39/13 UI 39/17 UI 39/21 UI 48/17 UI 48/26 ​ ​ Examples

/ Products / Resinated Transformers / Resinated Transformers EI / EI30 EI 30 EI 30/5 0.65 VA EI40 EI 42 EI48 EI 48/16 10VA EI 48/20 15VA EI 48/25 18.5VA EI54 EI60 EI66 EI75 EI84 EI 30 resin transformers from 1 to 2.8 VA The items of the EI30 series are safety transformers, resistant to short circuits for construction or failure proof, for frequencies 50 / 60Hz, built according to the European standard EN61558-2-6 which guarantees a product of guaranteed quality and reliability, use of excellent materials also from the constant construction methodology and from our testing systems applied to the entire production. The epoxy resin construction guarantees greater mechanical strength and better resistance to external agents as well as allowing insulation between the active parts greater than 4KV thanks also to the use, for the windings, of supports with separate chambers. The peculiar features of the EI30 series: Wide range: pinout (your choice) primary voltage (optionally from 24V up to 440V) secondary voltage (optionally from 4V to 48V) · Possibility of distributing the total power up to 2 secondaries · Flexibility on the quantities that can be ordered Dimensions Menu EI 30 EI 33 EI 38 10 PINS EI 38 12 PINS EI 40 EI 42 E I 48 EI 54 EI 60 EI 66 EI 75 EI 84 ​ Examples Documents ei30.pdf